Saddle Days Coupon Code

Our first coupon code "flash sale" was so successful that we decided to do another. This time VO saddles and the Grand Cru seat post will be 20% off. The sale lasts from 12:00am Saturday, Nov. 20 until 11:59pm Sunday; that's EST time zone.  

The coupon code is "saddledays".  Click on "My Cart" (not "Checkout") on the top right of the screen to enter a coupon or a gift certificate.

We also have gift certificates again, just in time for the holidays.

Still More Nice Bikes and a Few Notes

Nice Bikes

• One of our Japanese customers sent us a link to his blog that describes his building-up a VO Rando frame. The build is super as is that flashlight and holder. I love blogs like this.
• Here's a flicker set about installing a Grand Cru crankset.
• How about this tandem that's based on am old Gitane frame. I like the linked VO chainguards.
• In case you missed them, check the comments section in this recent post for more links to pics of cool bikes.

Notes

• Prices for Japanese products continue to rise along with the value of the Yen. If you need Nitto, Honjo, Ostrich, or Sugino products, it might be wise to buy them sooner rather than waiting until Spring. Would that make you a currency speculator?
• We're occasionally asked if any VO products are made in China. One of our bottle cages is. About 90 percent of our products are made in Taiwan. A few are still manufactured in Japan, the USA, or various other places.
• Some of our products are being stocked by Quality Bike Parts, or QBP, the worlds largest bike parts distributor. So over 4000 bike shops now have access to them.

Grand Cru 110 or Alpina

The question we get is, "Which of the high-end compact double cranks should I put on my new bike?" Since we've been long-time fans of the Sugino Alpina crank and now we make what is seen by many as a competing crank, the Grand Cru 110, it's a question we must often address. The Alpina is regarded by many as the best compact double available today, the successor to the discontinued TA Zephyr. How to choose? I'll try to be objective about this and do a point by point comparison.

Style

This is the most obvious difference between the two cranks. The Alpina is a modern design while the Grand Cru could have been designed in the 1960s. Since this is strictly a matter of taste neither crank has an advantage.

Q-factor

The Crand Cru double has a q-factor of about 140mm; the Alpina's is 159mm. Both use 110mm square taper BBs. So the Grand Cru has significantly lower tread, which some cyclist believe results in less knee pain and a higher power output.

Weight

A 172.5mm Alpina crankset weighs 702g. The Grand Cru 172.5mm crankset weighs 683g.

Chainrings

Both cranks have very well made 110bcd CNC cut chain rings made of 7075 alloy. These have superior wear characteristics compared to the chain rings found on lower cost cranks like the Sugino XD and regular VO cranks. Shifting is great with either, perhaps a touch faster with the Grand Cru. Both are 6-10 speed compatible.

Note that the Grand Cru is also available as a triple, while the Alpina is only a double.

Crankarms

Both cranks have arms that are cold forged and polished. The slightly wider width of the Alpina means that it's probably a little stiffer.

Note that each size Grand Cru crank has different crank arm length, while the various sizes of the Alpina cranks all have the same arm length, but with the pedal hole drilled in a different place. Look at the first photo in the post to see what this means.

Fit and Finish

The close up photos below show the differences better that I can explain; click on them to enlarge. The fit is clearly tighter on the Grand Cru cranks. This is most evident where the the chain rings meet the spider. I'd judge the Grand Cru's polish to be a little shinier, while the Alpina has more of a satin finish.

Cost

The Alpina currently costs $175. The Grand Cru runs $190.

Summary

So there you have it. The biggest differences are style and Q-factor, but these are very significant for many cyclists. If you need a much lower Q or like the classic style, the Grand Cru is the obvious choice. If Q is unimportant and you like the more modern look, or want to save a few dollars, the Sugino is a very fine alternative. It's hard to go wrong.

Do you really need a new frame?

Do you really need a new frame? Why not fix up a nice old high-end bike instead? My favorites are upper-tier Motobecanes and Uragos. But there are plenty of  other well-made and sweet-riding frames available for next to nothing on E-bay, Craiglist, or the local thrift store.

If you're thinking that it's too hard to find those odd sized seat posts, BBs, and headsets, that's no longer an issue. In addition to our French and Italian and British and threadless BBs, and our French and British threaded headsets, we now have seat posts in most of those odd old sizes.

The new posts are the well known UNO seat posts that are basically copies of an old Campagnolo design. It's actually a darn good design that was also used by Nitto, Ritchey, and a dozen other companies. Now there is no question that the $20 UNO post is not as nicely finished as a Grand Cru or Nitto post, but for $20 it's not bad. What is important is that it's available in: 25.0mm, 25.4mm, 26.2mm, 26.4mm, 26.8mm, 27.0mm, and 27.2mm. So the vast majority of old steel frames are covered.

We also have the Grand Cru triple 110bcd cranks in stock, which looks perfect on a classic lugged frame and has durable 7075-alloy chain rings that may outlast the frame. The double version is back in stock too and available in 165mm, 170mm 172.5mm, and in 175mm lengths. And we'll have the less expensive VO cranks back in stock in a few weeks.

I guess a fellow who's company sells frames really shouldn't be suggesting that you not buy one. But times are tough for a lot of folks, and all those cool old frames are just waiting out there, and it's a lot of fun to fix up a nice old bike...

Have any pics of cool bikes you've fixed up? Feel free to link in the comments.

Restocking and Yard Sale

 

This is why we need more space. Anyone who was here for the yard sale saw that the middle part of this warehouse bay was almost empty. All these boxes are from one 40-foot container. And there is another 40-footer already at sea and yet another soon to be loaded.

Here are some of the items that we were out of and are now back in stock (or will be tomorrow).

• Porteur handlebars
• Belleville handlebars
• Zeppelin  650b fenders 
• VO Hammered 37mm fenders
• VO Fluted 48mm fenders
• Guidonnet brake levers, 23.8mm

We also have a bunch of new products that I'll write about in the next few days.

Speaking of the yard sale, it was a great success and lots of fun. We met a bunch of very nice customers and saw some old friends. Both the warehouse area and the showroom were packed shoulder-to-shoulder for the first hour and pretty darn busy for the rest of the morning. We sold about 80% of the yard sale items and a lot of you got spectacular deals. Thanks for coming!

Yard Sale Loot

Here are a few photos of stuff we'll be selling at the VO yard sale this Saturday.

We'll have some VO frames that are scratched or are prototypes. There are also a few classic frames, including a Mercian Superlight, two Motobecanes, a Jack Taylor Tandem, a Bottechia Pro that are owned by staff members or were used for reference.

There are a bunch of fenders and a few tires. Many wheels too.

 TA and VO chainrings, saddles, CLB brake levers, cranks, handlebars, racks, decaleurs, prototype gloves...

Kate, our company barista, will be pulling shots.

Finally, we put a few more things on the specials page.

About VO, Part 1

We've had a lot going on over the past 8-weeks or so here at VO.  We went to InterBike as an exhibitor for the first time, shipped off our biggest order ever to the largest bike distributor in the U.S., got some new employees, lost one of the best (we'll miss you Perry!), and launched a new website. And had our best ever retail sales week.  Needless to say, all of this change makes me want to take stock of things.  

So, it seemed like a good idea to write a little history–from the conception of VO to where it stands today and where it might be headed. Looking back at where we began 4-1/2 years ago and seeing where we are today is pretty amazing, if not a little scary.  I'll write four posts on the subject, beginning with the origins of the company and concluding with where we are today.

About 11 years ago Annette and I sold a company I'd founded and decided to take a few years off. We traveled a bit and also enjoyed lot of cycling. Eventually, I went looking for a new bike. Having raced a little in my youth and owned several racing bikes, as well as a couple of touring bikes, I wanted my new bike to be something in between. I knew that my racing days were long over and that we now preferred staying at B&Bs to camping. So this new bike would be for credit card touring and long rides alone in the country, and also for the fast club rides I went on almost every weekend. What I wanted was a rando bike!

At first I thought I'd just order a sports touring bike from a well known California company; I rode one and it was nice, but not exactly to my tastes. I'm just not a fan of fancy lugs, two-tone paint, and ornate decals. I also preferred the ride and geometry of several older French bikes I'd owned. I got a Kogswell Model P as an interim bike. I soon sold it and bought an Ebisu, which I think was, by far, the best production (or semi-production) frame available at the time.

It was during this bike search that I realized just how scarce some of the components and accessories that I wanted to use were, and how difficult it was to find a production frame that rode the way I liked. Plus, I was getting the itch to start a new company. So, I decided to form a really small company to source various parts I thought were both cool and useful. I never intended to make much money from it or to grow it beyond one or two employees. It was just  something to keep me off the streets, to have a little fun with and, most importantly, to provide a service to other cyclists who shared my tastes. I formed an LLC and deposited the hefty sum of $6000 into its bank account.  That was 4-1/2 years ago.

The business plan, if you can call it that, was to import some hard-to-find parts, make a few small items like bell mounts and decaleurs, and maybe to eventually to have a semi-production frame made. That was the extent of our plan. The name came from my orange bike, which was in our living room when we were trying to think up a name over a few glasses of wine. I'd had zero experience in the bike business, had never sourced anything overseas, and didn't even want to work full time. The only thing I was sure of was that there was a need for practical, well, made, attractive, and reasonably priced components for cyclists who wanted an alternative to the racing-style bikes and parts that, at the time, dominated most bike shops.

Many of our first items were new-old-stock (NOS). We bought most from an old acquaintance and parts distributor. We soon started making contact with European distributors who had stocks of interesting NOS parts. Then came some new stuff from Japanese and European firms including MKS, Stronglight, and Ostrich. Next we started to having racks and decaleurs made by a local metal fabricator and then bags, flashlight mounts, and more leather goods. This was fun and the company was starting to grow rapidly.

Reading the 685 posts on this blog will give you a pretty detailed history of what's happened since, but I'll write about some highlights in Part 2.

More Sale Stuff

We've been going over the inventory and identifying things that will be discontinued or that we are overstocked on. We're trying to make room for upcoming big shipments. So there's a bunch of new stuff on sale. Check out the Specials Page. Some of these items will only be on sale for a day or two, or until stock levels are back to normal.

The long term plan for VO is to sell more VO and Grand Cru products and items that are unavailable elsewhere, and slowly cut back on the more common items made by other companies.

24 Hour Crank Sale and a New Site Feature

We're expecting hundreds of VO  and Grand Cru cranks in a couple of weeks. Meanwhile we have a huge inventory of Sugino cranks. This got us to thinking that it would be fun to try out some of the coupon features built into our new site software.

So we've created a coupon code (sugsale) that gives you 30% off any Sugino crank that we have in stock. Simply enter "sugsale"  under "Gift Certificates or Coupons" on the "My Cart" page. The coupon will only be effective for one day, tomorrow, October 27.

If this works, we'll have other coupon sales from time to time.

Just to be double extra clear: Click on "My Cart" (not "Checkout") on the top right of the screen to enter a coupon or a gift certificate.

More Nice Bikes

Everyone here really liked Tyler's Polyvalent build. It's not a build I would have undertaken, but now that I see it I like it's minimalist look a lot. In fact, I might build something similar for myself. Tyler wrote:

Here's a photo of my new polyvalent. I'm commuting on it every day.  

It's a great frame...  the welding and paint are very well done and it rides like a dream!

I'm running a Shimano Alfine 8-speed hub and Paul Components canti brakes, both controlled by a Jtek shifted and brake levers. Jtek makes excellent gear for time trial bikes, but their parts are just as amazing on a commuter ride. Perhaps you might recommend them to your customers...

Anyway, thanks again for all the great VO products I own, they're top notch!

And here's a cool rando/porteur built by Pierce.  His description of it is the first comment to this post.

Speaking of nice bikes, the Philadelphia Bike Exposition is this weekend. VO isn't displaying, but there should be no shortage of other nice bikes.

Miscellany and Pretty Bikes

 A few things that may interest you:

• We'll have a disc brake version of the dyno hub. A lot of you asked for them.
• Prototype PBP double-eyelet rims are here and they look great. We hope to have them in stock by mid-winter.
• A 700c version of the Polyvalent is in development.
• We just received another shipment of Pari Moto tires.
•  Longtime customer Bob R.attended the annual TOEI Owners Meeting in Japan. He was also the guest of honor. Photos can be found here.
• The photo is of Linda's VO Mixte, a very fine build.
• Hufnagel Cycles, of Portland OR, is creating some really cool custom rando-style bikes. Check out the first two, which feature a few VO parts.
• Kyle B. built a lovely mixte based on a 1984 Nishiki Sport Mixte frame. Lots of VO parts, of course.

The First Annual VO Yard Sale

We're having a yard sale, though we don't really have a yard, so it's really a warehouse/parking lot sale. Here are the details:

What's for Sale:

We're selling most of the sample parts that were displayed at Interbike or in our showroom; they lack packaging or show some shop wear, but are almost like new. Then there are some returns, a bunch of prototypes, a few scratched frames, some discontinued parts, and stuff that's been used on test bikes. All-in-all there are hundreds of items. We want to blow them all out in one day! So most will be priced at about half the regular web site price.

We'll also have frames, and bikes, and parts that our staff members want to sell from their personal stashes.

In case you can't find any garage sale stuff you like, we'll offer 20% off on any parts, accessories, or frames (but not mini-build kits) in stock. You must be here to receive the 20% discount - this is not available through on-line sales.

When:

The VO Garage Sale will take place between 9am and 1pm on Saturday, November 6, rain or shine.

Where:

At Velo Orange of course, 1819 George Avenue, Annapolis MD, 21401

The Fine Print:

• Nothing can be pre-ordered.
• Cash or credit card only.
• the 20% discount is available to those who buy in person, not on-line.
• Items on sale and frame mini-build kits not included.

LEFOL cia, Specialites en Duralumin

I was cleaning up my work space this morning and came upon this brochure. I think it's from the early 1960's or late 1950's, but I'm not sure. It's interesting to see the fender hardware that both Velo Orange and Honjo use was available so long ago. The same goes for the hammered and zeppelin fender textures. It's like that with so many of the parts we like and shows how far ahead those French guys were, and why we're inspired by so many of their designs. (As always, click on the images to enlarge.)

BTW, the scans we made are of copies of the original that Mel Pinto gave me years ago. You'd be amazed at the copies of old French catalogs lying around my office. Many are from Mel, one of the great men of the French and American bike business!

Those New Dyno Hubs

A lot of folks have e-mailed asking about the new dyno hubs I've mentioned. I'm also told there was some rather silly speculation about them in various discussion forums (Due to time constraints I no longer read any forums). In any case I thought I'd say a bit more about them.

First off, I want to repeat that new hubs are not designed by VO. I only wish we were that smart and inventive. We found this new company, or they found us, almost by accident, but when I saw the hub mechanism I was stunned. I realized that they would cut resistance, compared to a normal dynamo hub, by 50% to 90% on most cyclists bikes.

How is this possible without defying the very laws of physics? It works by uncoupling the dyno mechanism when the lights are not on. So the drag, during the day is that of a normal high-quality sealed bearing front hub. At night the drag is that of a nice (say Shimano) dyno hub. My informal survey of VO's dyno-using customers shows that most use their lights no more that 10-15% of total riding time, yet they have dynamo drag 100% of the time.

That's why I can't imagine anyone buying a dyno hub without a clutch now, except for someone who has their lights on all the time. Game changing? It is for me!

The hub looks like most other dynamo hubs, save for a circular on/off switch that activates a sort of internal clutch. They are now in production, but delivery has been pushed back to about the end of the year. The price should be around $120. Pre-built wheels will also be available.

A new head light will also be available. It uses a Cree LED.  Our lighting expert and tester says it's among the brightest light ever made, though the beam is a little narrower than the best European lights. The cost will be around $60.

Questions and Answers

We get a lot of e-mail questions at VO, an awful lot! I thought I'd answer a few of the ones that have recently been asked several times.

On Cranks:

When will you have more sizes?

We have a 40-foot container due in at the end of the month. All the VO and Grand Cru cranks will be on it, except for the 172.5 sizes. They are a couple of months out.

Will you sell just the 50.4bcd arms, rings, bolts, single speed version, etc?

We'll have chainrings in various sizes in about 2-3 months. The bolts are already for sale. I have not yet decided if we'll sell the arms separately. A single speed version with various single speed specific rings is on the way, maybe by late fall.

On drop Bars:

When will you have other sizes:

Most sizes will be here in a few weeks, but the 48mm Rando bars are delayed a couple of months.

Will two rolls of tape cover them?

Of course, just like any other bar.

On Rims?

When will the wider version of the PBP rims arrive?

Soon, maybe two months. They will be called the Raid rim and be 22mm wide, but look like the PBP.

Will they have double eyelets?

We are working on a double eyelet version of the PBP rim first. Once that's done we'll see about the Raid rims.


On Hubs:

What's up with the hubs you wrote about?

We've been testing them and all but the high flange cassette hub are going into production ASAP. We hope to have them in a few months. This has taken longer than expected, but when you see the quality and style of the final versions I think you'll be impressed. The wide flange cassette hub body is an all-new design so it's taking longer to get just right. The high-low cassette hub is done and in production.

What about the "game changing" dyno hub?

We've put many many miles of real world testing on the prototypes as has the factory. They are now in production and should be here this fall. We'll have a matching LED light that is brilliant (pun intended). I'm super impressed with this combination. The price is great, but the performance is ground breaking.

New Handlebars

I've wanted to offer VO bars for a couple of years, but it's surprisingly time consuming to design and test bars. There are so many subtleties to their shape. We looked at many popular modern and classic bars (I have quite a collection) and tried to identify the best features of each. Then I added my own preferences, mostly longer grip areas or ramps. The result is these two new Grand Cru bars. The first is a classic road bar that reminds me of the old Phillipe Professional bar. The second is based on my idea of the perfect Rando.

Both bars have a high polished center section. The area under tape is bead blasted. The Grand Cru crest appears on either side of the clamp area. The clamp area is bulged, not sleeved, to prevent "creaking".

Our Classic round bend handlebar, the Course bar, has a long flat ramp aft of the hoods. This allows you to slide you hands forward or back which, at least for me, adds a lot of comfort. The drops are open and also extra long so, again, there is plenty of room to move your hands for and aft. The drops are  parallel to the ramps on top, allowing them to be level. You'll see bars like this on many classic constructeur bikes. This is a great all around drop bar for long distance. Though it may not be important to everyone, I also think this is a great looking bar with smooth classic curves and a very nice finish.

The Course bars have a medium drop of about 114mm. The reach (measured from the stem clamp forward) is about 110mm. Available in 42, 44 or 46cm center-to-center. About 395g (44cm)

Our new Rando Bar is the bar that I always wanted. After riding with several different French, American, and Japanese rando bars, I designed this bar to my ideal. It has substantial flare for a wide stance in the drops. The bend is round and open, as on our Course bar. The area behind the hoods is long and flat for extra comfort. The drops are also long so you can slide you hands well back.

The Rando bar has a medium drop, 130mm. The reach (measured from the stem clamp forward) is about 115mm. Available in 42, 44, 46, and 48cm center-to-center at the ends; the width at the hoods is about 7cm narrower than at the ends.

In other news:

• We have more Grand Cru 50.4bcd cranks in stock.
• Check out these nice photos of a VO Randonneuse in Japan.
• We have a new saddle. I'll write more about it soon.

The New Site is Live!

store.velo-orange.com

 Among the improvements:

• More product photos and views; we'll be adding them for weeks
• You can set up an account and your info is saved for future orders
• There is a wish list that you can share
• There is a compare products function
• One click "back in stock" e-mail notification (coming soon; still buggy)
• Easily searchable
• Sorting filter
• Recently viewed items
• Breadcrumbs

 Please let us know what you think.

BTW, if you find a bug please tell us which operating system and browser (including version) you're using.  We know that early versions of IE are not compatible.


UPDATE from Kyle:

We know there have been a few issues so far. For some people, the "Under Construction" warning comes up instead of the home page. If you're getting this page, it means your computer has cached the old page and just needs an update. You can try to clear the cache on your browser, but if that doesn't work just point your browser to store.velo-orange.com and you should be able to see the new store no problem.

We had problems accepting international orders, but we're working on it now. If you're still getting an authorization failure when you try to check out, send us an email and we'll figure it out with you.

For those of you using Internet Explorer: if you're not already, please upgrade to the latest version IE 8! If you're running version 6 or 7 the site will not display properly; it still works, but the layout gets destroyed. The new site was designed to work best with Firefox/Chrome/Safari (standards compliance is important), so unless you have specific reasons or limitations that require the use of Internet Explorer I'd really urge you to use one of these browsers instead.

We'll be finding many little bugs over the next few weeks, but we'll take all the help we can get with spotting them. Thanks for being patient while we work out these (and other) problems!

Grand Cru 110bcd Cranks Are Here

As we wait for the new site to filter through the inter web tubes, I thought we'd post a few shots of the GC 110bcd double crank. We just received a small advanced shipment of these by air. The rest will arrive by ship in a few weeks.

They come with 48/34t 7075 alloy rings; that means they'll last a long time. The 7075 rings really are a big deal; that's why TA rings are so expensive. The price is $190 and the q-factor is around 140mm. The 170mm and 175mm lengths are here. 165mm and 172.5mm lengths will arrive later. And, yes, the arms are cold forged. Weight is around 670g. The dust caps/bolts are self-extracting. Uses a 110mm BB.

The two new Grand Cru drop bars have also arrived. We'll take photos soon.

Then there is the new model VO saddle. It's shape and dimensions are close to that of the Team Pro. Photos and details coming soon.

VO Site Will Be Down on Tuesday

Here's the plan: If our overnight work session goes well, we'll disable the Velo Orange web site tomorrow morning. The new and improved VO and VOI sites should come on line later in the day. At least we hope they do!

This blog will also be redesigned to match the new site. Wish us luck.

Nice Post About VO

The Path Less Pedaled blog has a nice post about visiting Velo Orange.  As you may remember, Russ and Laura dropped by our shop a couple of weeks ago.

They also have a new e-book, Panniers and Peanut Butter. It's a gear guide based on 14 months of touring:

Panniers & Peanut Butter is 75 pages long and goes way beyond a simple list of our stuff, or even a technical look at the pros and cons of different items. It’s chock-full of photos, tips, stories, lessons - and probably everything you could want to know about all of our gear.

Interbike

Tom, Robert, Perry, and I will be at Interbike this week. Interbike is the biggest bike show in America. Thousands of bike shop owners and distributor's representatives attend. So do most of the bike and component manufacturers. It is trade only, so not open to the public.

We have a 20 x 20 booth; number 1531. Please drop by if you attend, or ask the guys from your local bike shop to visit us. We'll have some cool pre-production samples of new rims, cranks, hubs, and other prototypes. We'll also have most of our existing components on display.

A Few Photos and Links

 

 

Box Dog Bikes in San Francisco stocks a lot of VO parts. They also do very nice builds on our frames, like the Rando and Mixte above. Drop by if you're in the Bay Area.

Russ and Laura are on an open ended and long term bike tour. They dropped by VO world headquarters today. You may know Russ as the author of the excellent Epicurean Cyclist blog. Their trip is documented on The Path Less Pedaled blog, which is also well worth reading. Laura creates handcrafted jewelry & bike accessories. Check out her work at the Tangerine Treehouse.

Fyxomatosis is a strange and wonderful shop in Australia. They make chain rings and build cool bikes with some VO components. They also have some classic Italian parts.

Frame Fit

I'm sure that most readers have their frame size dialed-in. Our customers are generally experienced cyclist who've owned enough bikes to know what fits. But we do get an e-mail every week or so asking advice on frame size selection. So here it is.

Now, I don't claim to be an expert on fit and find that even those who do are often not. I've been sized for a frame at least four times using various methods by self-proclaimed experts and been assured that I require a 57cm, a 59cm, a 60cm and a 61cm frame. My perfect top tube length is definitely, 58cm, 59cm, or 60cm, depending on the expert. So here is my non-expert advice on picking a VO frame size:

I generally recommend getting a traditionally-sized frame, one that's larger than many race bike oriented shops would recommend. The traditionally sized frame will allow you to get the handlebars to proper height without a super-tall stem. And it will allow a reasonable stem extension that does not put too much of your weight over the front wheel. The frame will handle better, be more comfortable, and you'll look better riding it.

Start by checking not at the frame's nominal size but the frame's stand-over height. This is the height of the top of the top tube of the bike with the size tires you'll use. Looking at our frame geometry table you'll see that the stand over height for a 51mm VO Polyvalent is 748mm with 38mm tires. Adjust for tire size, if you plan to fit 32mm tires, subtract 6mm. Most folks will want about 20-40mm clearance between your, ummm, nether-regions and the top tube. A bit more, or less, may be preferred by some. So the next step is to measure your personal stand-over height, or pubic bone height (PBH).

To measure PBH put on your cycling shoes and stand upright with you back to a wall. Spread your feet to about the same width as bike pedals. Now hold a large book square against the wall and raise it firmly against the aforementioned nether region. Have someone measure from the floor to the top of the book. Do this carefully to the closest millimeter. That is you very own PBH. With PBH in hand we can select the frame size based on stand-over height.

You'll also want to check that the top tube length will work for you. Many years ago I learned a method that's simple and gives you a good starting point if using drop bars. When on your bike, with hands on the brake hoods, look toward your front hub, the front axle should be hidden by the handlebars. If the stem extension is reasonable, between 80mm and 110mm, and the saddle rails are clamped to the seat post at, roughly, their midpoint, you have a top tube length that's about right. Now some will take me to task as this method has fallen out of favor for being old fashioned and imprecise,  but it's close enough that you can adjust the saddle and stem length to fine tune fit later. So try this on a few bikes and measure the top tube length of the one that fits best. Measure from the center of the seat tube to the center of the head tube along the top tube and compare to the frame geometry chart. I think it's more important to get the top tube length right than the stand-over height.

Of course this method is not going to work if you plan on using upright bars. In that case go for the longer top tube since upright bars generally sweep back.

Remember that this post is about buying the right sized VO frame and this method will do exactly that. You'll need more information and experience to find your best position on the frame (or to order a custom frame). A good place to start fine tuning would be by reading Bill Boston's site.

Rando Mini-Build Kit

Here is the new Rando mini-build kit.

It includes:

• Rando frameset
• Grand Cru Sealed Bearing Headset, mirror finish
• Grand Cru Seat Post
• VO Rando Rack
• Tektro R558 brakes

The price is $795. And any other components ordered at the same time are 10% off.

This is a limited time offer, when our existing stock of frames starts to run low it will be discontinued.

Mixte Mini-Build Kit

The VO Mixte Build Kit is finally available. The cost is $595.

The kit include:

• VO Mixte Frame
• Tange Levin alloy headset
• Grand Cru Rando rack
• Grand Cru Seatpost
• Tektro R556 Brakes
• Temple bell

The mixte frames will not be re-ordered for 2011, so get them while they last.

BTW, the reason for not re-ordering mixtes is that we're having a bit of a warehouse space crisis and we need to cut down on bulky items like frames.  We are looking for more warehouse space in our neighborhood or, perhaps, a bigger building to house VO World headquarters when our lease expires. I think we'll also skip the fillet brazed frame project for now.