PBP Rims, Updated

PBP rims are here. From Tom's VO Imports blog:

For years cyclists have been lamenting the loss of the simple box section rim in a shiny silver polished finish. They were available here and there but you really had to scour local swap meets, eBay and Craigslist. If you did find them they were usually used, and in varying ranges of condition, mostly poor to fair at best and required a careful and very experienced builder to get them close to true.

Well, no more of that. Velo Orange has worked for months with one of the premier rim companies in Taiwan. We researched different widths, shapes, and materials, and what was being currently sold. It quickly became apparent that we needed to offer an alloy doublewall rim. Doublewall construction adds a bit of weight as compared to singlewall (or open box) rims, but we feel a classic doublewall box design is far superior in terms of overall strength, load capacity, and impact resistance.

The PBP rims in house weigh around 450g. The 19mm outside width and 13.2mm inside width is ideal for tires up to 32mm.

We paid a little more for stainless eyelets and a lot more for a high polish finish. We kept the graphics down to an absolute minimum; there is a simple VO sticker for identity.

The 700c PBP rim is offered in 36 and 32 hole versions. For wheelbuilders, ERD is 606mm.

The price is $50 (not $40 as we initially thought; sorry).

Since Chris is on vacation, questions in the comments may not be answered for a long time.

UPDATE: After reviewing all the costs we realized that the price of these rims has to be $50, more than we initially thought, but still pretty reasonable. Chris says he was simply looking at the wrong column in one of Tom's infamous (and yard wide) spreadsheets.

Vacation Week

VO will be in slow mode for the next two weeks. Annette and I are off to the Exuma islands for 12 days of R&R. Heidi is finishing up a sailboat race.

Tom alone will be dealing with all the e-mails. Please give him a break and save the non-urgent mail until I return. Orders may ship a day later than normal.

If you're planning to visit the showroom, please call ahead because Tom is the only one there to show you around. The rest of the staff will be hurriedly packing orders.

New VO Info Website

Trygve packs orders, helps manage inventory, and is our new web guy. In his spare time he's put together the new VO Info site. I had long wanted a place to post instructions for VO products, a list of VO dealers, and a few helpful articles from this blog. I think Trygve has made a great start on this!

I guess I should ask what other information you'd like to see there. But remember that I'm not Sheldon Brown and don't have his encyclopedic knowledge of all things bike related. So be reasonable.
The photo is of Trygve (on the right) and Sam with a stack of postal bins. It was supposed to be a joke on Heidi, who is in charge of packing/shipping and usually comes in early. But Tom didn't know and knocked the tower over. That's how we amuse ourselves here at VO ;<)

By the way, Trygve's long commute to work is often on a beat low-end moutain bike. Sam is a cat-3 bike racer who's recently been finishing in the top ten in local races. Heidi is only a casual cyclist. All her spare time is devoted to racing her 33 foot sloop and she is not even remotely casual about that. I know because I've crewed for her a couple of times.

Happy Bastille Day!

Also, we an have almost firm deliver date on the 650b Polyvalent frames. They are about 90 days out. I will get additional confirmation and commitment soon and then we can accept pre-orders. As I wrote earlier:

The main differences from the photo are that the color will be dark gray and there will be an extended head tube. It will be available in four sizes initally, 51 x 54cm, 54 x 56cm, 57 x 59cm, and 60 x 61cm. Remember that it's designed for city bars so the top tube is longer than on a rando frame. We'll add more sizes on the next run.

The introductory price for the frame and fork will be $400, plus shipping. That price will go up on subsequent production runs.

New Threadless BB

I recently mentioned a new threadless BB design I saw in Taiwan. Much to my surprise a sample arrived today. Usually development on products like this takes a very long time, so I wasn't expecting to get one for many months.

This BB uses a new locking system that works even if the threads in the BB shell are damaged, or non-existent. That means it should fit Swiss and other oddly threaded bikes. As the adjustable cup is tightened the silver sleeve is pushed up the tapered outside face, expanding and locking in the BB. Installation requires a traditional-style BB spanner or a pin wrench.

We're going to try it on a few frames before ordering, but the quality looks great. The bearing are big sealed cartridges with serious weather seals. The body and cup are alloy with nice machining. The axle is chromo steel, but not hollow. As for the colors, we can have that changed; maybe lime green?

If all goes well we should see these arrive in about 3 months. The first shipment will probably be 107mm, 110mm, and 113mm lengths. We don't have final pricing yet, but I would guess they will run around $75.

More on New Rims and Wheels

A lot of folks seem interested in our plans for wheels and rims, so I thought I'd write a little update.

PBP 700c rims

The first VO rim we'll be getting is a highly polished 20mm wide closed box section that looks a bit like the old Mavic MA2. It's a true double wall rim with nickel-plated brass eyelets The recommended tire size is 23-32mm tires. This should be the perfect rim for our upcoming rando frame. Weight will be around 450g. We have ordered them in both 32h and 36h. Pricing is not yet set, but we're trying to keep it under $40.

These rims have already been made and polished and are now getting eyelets and stickers. We should have them here around the end of the month. They will initially be available individually through the VO Store and through other fine shops. Later we'll offer wheels built with them.

Diagonal 650b rims

The second rim will our new 650b rim. It's also a mirror polished, but a triple closed box section that looks a little like the CR18 we now sell. Other specs are: 24.5mm wide, 36h only, a little over 500g, nickel-plated brass eyelets. We've mounted various 650b tires on these and they are perfectly sized. Again, the price we're aiming for is under $40. If folks like these we can also have them made in 700c. This is a very strong rim that could be used for loaded touring.

These rims are expected in October.

New Wheels

It's been a time consuming project to find the best place to have new our wheels built. These rims come from Taiwan so our first idea was to have them built up in Taiwan. There are several high quality wheel building operations there and the per-wheel build cost is very attractive. But wheels are bulky and in shipping them across the Pacific we would be shipping a lot of air. It turned out not to be much more expensive to have them built here so that's what we'll do. As with our other wheels they will be hand built and hand trued.

We plan to offer the PBP rims laced to Shimano 105 hubs and to a dynamo hub. The Diagonal rims will go on similar wheel sets, plus a 3-speed wheel. We are again considering making VO hubs, but does the world need another high-end cassette hub?


The photo is of our new rim sticker, but not our rim.

SA 3-Speed Wheels

I have to admit that despite offering 8-speed internal-gear wheels, I think that many people would be perfectly satisfied with a less expensive 3-speed hub. Most cities in the US are just not that hilly making those 3-gears sufficient for many utility and city bikes. Of course if you live in San Francisco or have a long commute, you'll want the wider range of an 8-speed hub.

We just got our new 3-speed wheels. They have Sturmey Archer AW hubs laced to CR18 rims with stainless steel 14 gauge spokes. As with our other wheels they are hand built and hand trued.

The AW hub is the classic model that's been used on millions of European city bikes. In most places, that are not desperately hilly, the range and 3 gears of the the AW are sufficient for a utility/city bike. The spacing is 126mm, but you can add spacers since the axle length is 175mm. More complete specifications and details can be found here.

The shifter is the cute little thumb shifter found on all those vintage English roadsters. It's made for 22.2mm bars, but will fit on road bar-sized 23.8mm bars too. Shifter cable, axle nuts, and related hardware are also included. The price is $120.

On a somewhat related topic, this op-ed from the New York Times may interest those of you who, like me, are interested in car free communities. Imagine car free neighborhoods in the very cradle of the US auto industry.

ALSO, Shimano 105/CR-18 wheels and wheel sets are back in stock.

VO Closed Friday for Independence Day

We're closing Friday, July 3rd, for our Independence Day holiday.

Years ago I used to ride down to the Mall in Washington DC to watch the fireworks with a bunch of fellow cyclists each 4th of July. We used to lay in grass and, discreetly, drink beer while the fireworks exploded almost directly above us. Great fun! Now with terrorism hysteria and heightened security I'm not sure that's even possible.

These days we take a ride in the country and then just walk to the waterfront at the end of our street to watch the explosions over Annapolis. My 9-year old son and his friends love fireworks, as I used to. But lately I've found them a little too martial and jingoistic. On the other hand, my son's swim team is in the Annapolis town parade and there is a neighborhood kid's bike parade that's always a hoot.

In any case, I hope everyone has a great weekend. And a happy, if belated, Canada Day to all our customers from the north! (It was yesterday.)

Anyone doing any cool bike related stuff?

Bits and Pieces

Here a few unrelated, but interesting, items:

Stems

Several people have asked why VO stems are lighter than some others. The reason is that VO stems are cold forged. Many other stems, even some that cost considerably more, are "melt forged"or die cast. These less expensive process requires more metal, and weight, to archive adequate strength.

Bones

The New York Times health blog, called Well, has a fascinating piece entitled, Is Bicycling Bad for Your Bones? It appears that competitive cyclist lose bone mass at an alarming rate.

In 2006, Aaron Smathers, then 29, was a graduate student in the Department of Health and Exercise Science at the University of Oklahoma, gathering data for a study of brittle bones in cyclists. One of his subjects was himself, since he’s been a bike racer for years. A recent scan had revealed that his bones were less dense than usual for a man his age. Not long after those results came in, he crashed during a race, snapping his collarbone.

MKS

We are getting a small shipment of MKS products next week so some of the half clips and other thing we're out of should be back in stock. A larger shipment with more items is due in a few weeks.

New VO Info Site

We're working on a new site that will have PDF and HTML versions of all our product instruction sheets as well as informational articles adapted from the VO Blog and detailed frame specs. It should go live very soon.

A Town Without Cars

A few weeks ago the New York Times ran an excellent article about Vauben, a German town without cars. I meant to mention it then and was reminded to do so when The Independent ran an similar piece last week.

From the NYT:

Street parking, driveways and home garages are generally forbidden in this experimental new district on the outskirts of Freiburg, near the French and Swiss borders. Vauban’s streets are completely “car-free” — except the main thoroughfare, where the tram to downtown Freiburg runs, and a few streets on one edge of the community. Car ownership is allowed, but there are only two places to park — large garages at the edge of the development, where a car-owner buys a space, for $40,000, along with a home.

Pretty cool! Read the articles for details, but the idea that so many families are attracted to a car free, and bike friendly, place is very encouraging.

Update: In the comments Marc shared this study which I found very interesting.

Tom's Ugly Grips

Tom and I almost always agree on the products VO should stock, but there are exceptions. When he saw these new grips made especially for Dia Compe inverse brake levers Tom just loved them. I wasn't so sure. He thought they looked sleek and the groove for the housing was a brilliant idea. I thought they looked too plain and would prefer a grip with more texture. But I trust Tom's judgment and so I placed an order. Of course that didn't stop me from kidding him about his "ugly grips".

Well the grips finally arrived. The color is a close, though not exact, match for the lever bodies. The material is rubber-like and a little firmer than most grips, but not bad. And at $7.50 a pair the price is certainly right. On the down side, the rubber has an uneven sheen; it looks a little oily in spots.

So what do you think? Was Tom right? Will they sell well? There's a six pack riding on this!

One other interesting item, a VO Grand Cru seat post just sold on E-Bay for $57. They are only $45 new! Here's the link to the auction. I guess we should raise prices?

Little Problems

Nothing is ever certain when working with factories 8,000 miles away. Our last shipment is a good example. Two of the items I was most looking forward to didn't make the shipment. The new two-legged kickstands and the Dia Compe guidonnet levers were delayed. We buy from many factories that ship our products to our agent's warehouse, rather that directly to us, where it is consolidated into a single air or sea shipment. But production delays mean that some items don't make it by the ship date. Since both the kickstand and the levers are brand new, it's not surprising that there were delays in the very first production run.

Our new anti-theft hub skewers did arrive. Unfortunately we incorrectly speced the length of the rear skewer (they only fit frames with 135mm rear spacing); just a simple mistake. But now we have to wait for replacement parts to make them fit other spacing. These use a special Allen wrench (it has a hole in the tip) that should deter most wheel thieves.

Our new saddles with the copper rivets are also delayed a few weeks. The factory missed a detail in our specs, the anti-stretch laminate on the underside. Again, just a simple mistake of the sort we all make.

On the other hand, the new Dia Compe cable clips are perfect. These are great for restorations and for securing shift cables on internal hub conversions. And they are available in all three common steel tubing sizes, 25.4mm, 28.6mm, and 31.8mm.

Bits and Pieces

I thought I'd share a few interesting bits of news.

French Headsets

We asked about getting the steel French thread headsets made and the factory wants a minimum order of 10,000 pieces. That won't do at all. It seems that steel headset production is very different from alloy and the minimums are much higher. So we will either have them made in alloy or have a CNC shop just make French threaded nuts, washers, and adjustable cups for a headset that's already in production, those being the only parts that differ on French headsets.

Threadless Bottom Brackets

There have been a few attempts at making square taper bottom brackets that don't use the threading on the frame. The advantage of this is that one BB will fit any frame, even Swiss, and they work on frames with damaged BB shells. But the only design that really worked well was the old Mavic version that required chamfering the BB shell and then used a pressure fit. Edco made a version that used a sort of cam mechanism, but was not as solid as the Mavic. More recently a Taiwanese company tried making a copy of the Mavic that didn't require modification of the shell; it was marginal at best and unsold stock can still be found in some catalogs.

I recently saw a prototype BB in Taiwan that used a different mechanism. It looks to be far superior to any threadless BB made in the past. VO is angling to be the first US importer. While more expensive than a standard BB, these have the potential to save a lot of great old frames.

Arrivals

There are some neat new bits on our next shipment, which should arrive next week. Among them are:

• The long awaited Dia compe Guidonnet levers
• Cable housing clips in various sizes for modern and traditional frames
  
• Special gum colored grips to match Dia Compe inverse levers with grooves for the brake cable.
  
• New and less expensive double leg kickstands to compete with the great Pletcher stands
  
• VO Tourist handlebars which are so popular that we have run out several times

The factories seem to be catching up after the "spring rush" and we have another shipment from Taiwan and one from Japan arriving in mid-July with more cool new components.

Chaincases

We have VO Porteur chain cases in stock again. These are still made in a two-man shop right down the street from VO world headquarters here in Annapolis. I admit that they are a pain to install and fine tune, but once in place they work great and they are an almost exact replica of the cases used by Parisian porteurs.

VO Drop Bars

One project that we've been neglecting is VO drop bars. We've asked several factories for drawings of discontinued drop bars in hopes of reviving a cool old design. It's always simpler and cheaper to use existing tooling, but nothing inspiring has surfaced. So we are starting from scratch on two designs. One will be a medium drop/reach touring bar with longish flats. The other will be a VO version of the classic Rando bar. Any suggestions?

VO Bar Tape, What Colors?

Tom has worked for months to find a mill in the US that can make cotton handlebar tape. Once he found one we went through a series of prototypes to get the weight, weave, and adhesive just right. Now, after dozens of prototype rolls, we're ready to start having it made. Here are some details.

• It's USA made exclusively for VO.
  
• The rolls are 10-feet long. That's longer than is standard so you can get a closer wrap or use it on mustache bars.
• The weight is just a touch heavier than Tressostar tape.
• Cost per roll will be about the same as Tressostar tape.
• The three easy colors that we'll definitely order are black, white, and natural or un-dyed (a light tan) since those are dye colors the mill always has on hand.
• We can any have any other color made; all that's required is the Pantone code for the color we want. But it will take six months to bring the color on-line and the minimum orders are substantial.

So the big question is what colors should we have made. I only want to start with just a few to see how this goes. It makes no sense to replicate Tressostar colors; only new colors will do. We've been thinking of light blue, dark green, and gold, but we're more than happy to consider suggestions. What colors would you like to see?

Also, fixed gear wheel sets are back in stock. Shimano 105/CR-18 wheels should be back late next week. And we will have a new Strumey Archer 3-speed/CR-18 rear wheel soon.

Projects

I thought some of you might be interested in a few new VO projects.

I wrote about the VO saddle bag support a few days ago and we're now waiting for samples of seat post mounts to use with the rails.

We are also looking for a factory to make VO clamp-on saddle bag loops. These may be made in the USA.

By fall you'll be seeing VO saddles with hand-set copper rivets, just like those British guys use.


A new VO saddle is also in the works. This one will be a medium width touring saddle to compete with the B-17. It may also be available in a sprung version.

After long, and probably unnecessary, delays due to packaging design issues, we are ordering VO brake and shifter cable and housing kits in silver braid, black, white, blue, and red. Other colors are possible in the future. Each kit will contain a bike's worth of cables. housing, ferrules, and end caps.

VO cotton USA-made handle bar tape is on the way, and in previously unavailable colors. I'll write more in a separate post.

I've decided to proceed with a VO French headset if tooling is affordable, but a few key questions remain. I'm considering using a loose ball design rather than sealed bearings to keep costs down. And this headset might be chromed steel rather than alloy since that would allow a slightly lower stack height which is important when replacing old headsets. The chrome might also fit better with the styling of many classic French bikes. Nothing is decided yet so I thought I'd run it up the proverbial flagpole and see who salutes. Anybody?

French Bottom Brackets Arrive

The long awaited French threaded bottom brackets have just arrived. That means that you can finally restore that Singer, Reyhand, or Goeland that's been collecting dust in your garden shed. Or look for an inexpensive Peugeot, Gitane, or Urago to turn into a budget randonneuse. In the past you were limited to very expensive Phil Wood BBs or searching E-bay for old stock, now we have the full range of sizes.

Grand Cru bottom brackets have oversize sealed bearings and boron steel hollow axles. The cups are alloy. They includes axle bolts, and weigh about 258gm in 110mm. The taper is JIS. They are available in 103mm, 107mm, 110mm, 113mm, 116mm, and 122mm.

A few notes that may prove useful:

• Most Motobecanes use Swiss, not French BBs, but some top of the line and later models used French. You can tell by checking the direction of the threading. A French BB has right hand thread on both sides. With Swiss it's left hand on one side.
• If you want to reuse your old crank remember that it may be ISO taper, especially if it's an old TA or Stronglight or Campy. You can use a JIS BB, but the crank will sit 3-4mm further outboard; compensate with the BB spindle length you choose. Many old double cranks used 118mm BBs; I find 116mm JIS BBs to be a reasonable replacement.
  
• French headsets can still be found on E-bay and we may make some in the future. But if you replace the balls and grease regularly those old headsets will last a very long time.

Designing a New Saddle Bag Support

We have been selling the Viva Saddle bag support for a few years and, apart from one that broke, most everyone seems very satisfied with them. But I have the urge to make our own saddlebag support. I think we can improve on all the existing designs.

It seems best to have a support that mounts to the seat post rather than the saddle rails or seat stays. This allows the support to slide up and down the post to accommodate various sized saddlebags. The seat post is also strong and is designed for this sort of load.

I also would like to have a quick release version that uses a clamp that opens on a hinge and locks with a cam-type quick release. This is the system used on some of the seat post-mounted racks you see on mountain bikes. Some may be worried about a quick release clamp making the support easier to steal, but it's simple enough to replace the cam-lock with a machine screw.

The remaining question is weight; is the extra weight of a hinge and cam worthwhile? Or would it be better to have it removable by loosening two Allen head bolts? It should be able to support about 15 pounds, which I think is about the max load most would carry. Of course a few folks will want to carry more weight in a saddle bag, but this support would not be for them.

Thoughts? Ideas?

Stem and Stuff

VO stems have just arrived and will be in stock shortly. This last production run took a few weeks longer than usual so we had ran out of most sizes. Now we have a full stock of sizes in the 6-degree stems. We also have all the 17-degree stems plus two new sizes, 70mm and 120mm.

We also have a few other things we were out of including:

• Grand Cru Jockey wheels
• VO spacer bell mounts
• 22.2mm city bike brake levers

We'll be getting a shipment of Honjo fenders and other Japanese parts in a week or so. This will include the elusive spare fender hardware.

The Bike in Style Challenge

Like many, I don't understand the fashion industry, which is not to say that I care nothing about fashion. It is a sort of visual art and a form of communication that can't be ignored. But the industry built around it seems so profoundly absurd as to be a parody of itself.

A fashion blog in the New York Times declares that one reason people don't bike to work is for lack of stylish biking clothes.

A perhaps more superficial, though still important, consideration is figuring out something to wear....

“We have to make bicycling fun and elegant, which it is not yet in New York,” said Renaud Dutreil, the chairman of the North American arm of the luxury goods conglomerate LVMH

Clearly what we need is LVMH Moët Hennessy • Louis Vuitton S.A. offering us Louis Vuitton handlebar bags and Gucci saddles and Tag Heuer cyclo-computers and Givenchy toe clip straps. Yes; those brands and dozens of others are all part of the LVMH luxury conglomerate.

But I digress; the piece is actually about the “Bike in Style Challenge.” This is apparently a fashion show sponsored by LVMH and others that's geared toward bike wear. There is an audio slide show of the results here.

I suppose it's good to see urban cycling receiving this sort of attention. On the other hand, it's also somehow disturbing to see the ludicrous branding and empty labels of the fashion industry slapped onto bike wear.

12th Annual Le Cirque du Cyclisme

The 12th annual Le Cirque du Cyclisme takes place this weekend in Leesburg Virginia. If you're interested in classic bikes there is nowhere you'll see a finer collection. In addition to the bike show and swap meet, there are various rides, and a few seminars and workshops.

Leesburg is just south (I mean west !) of Washington DC and has lots of great country roads for riding. There is a historic downtown area with a few good restaurants, cafes, and bars. It's well worth the trip.

I've attended the past few Cirques and have learned a lot each time. This year I have another event the same weekend and I'm not sure if there will be time for both, but I may try to make it out just for Sunday. Tom will be there with a bunch of VO samples and classic parts for the swap meet. Here is a page of photos from last year.

Comment Moderation

As mentioned a few times previously, any blog that becomes even moderately popular attracts a certain number of, usually anonymous, comments that are rude or spams. The Velo Orange Blog has. I've been deleting comments like that as they come up, but that only seems to encourage some. Several regular commenters have urged me to simply ban anonymous comments. Instead I've turned on the "moderation" feature in Blogger (the blog platform we use).

What this means is that someone at VO has to read and "publish" each comment as it comes in. I've been doing that job, but because I get so many e-mails I noticed today that I've missed a number of comments (they arrive by e-mail) and not published them. Sorry. We'll start using the special "moderation" console instead so we don't miss any more.

Generally, the only comments that get rejected are those that are very rude or that are just an attempt to shill some product that's not related to the post. Critical comments are OK; even stupid comments are fine; and funny comments are most appreciated. There is a good dialog here with many experienced cyclists adding valuable information and new riders getting their questions answered. I'm proud of that and want to keep this little community growing.

The photo is of a canal in France, not a bad place for a bike ride.

Front Rack Basics

It seems that there has been a lot of interest in front racks recently, or at least a lot more questions about them have appeared in my inbox. Part of the reason for this may be that the style of bikes VO favors is attracting more and more interest. Our customers are no longer just crusty randonneurs and Francophiles cyclo-tourists. Ever more folks are switching from racing bikes and even loaded tourers to 'constructeur-style' rando and city bikes. So I thought I'd post some basics about front racks.

As you may know, and this is a generalization, bikes from the US and Britain historically were designed to carry a load on a rear rack on in rear panniers. Bikes from France split the load front/rear or were front load biased. The low trail geometry favored by the better French builders, the constructeurs, worked well with front loads. And since VO is a Franco-centric place, we put a lot of emphasis on front racks.

Small Front Racks


Cyclists generally use a front rack to support a handlebar bag, and, occasionally, a larger load. That is why most front racks have a fairly small platform, like those on the Nitto M-12 and our Rando rack. The M-12 is for bikes with canti brakes and is attached to canti brake posts. The VO Rando rack is for frames with caliper or center-pull brakes and is attached to the fork blades, via either braze-ons or p-clamps. But two racks are almost identical in size and function and they are the racks that most of us need and use.

For those who would carry a bit more there are racks that mount on the fork dropout eyelets. The VO Constructeur rack is an example of what might be termed "medium duty." It's still light enough for just a bar bag, but it can support a 12 pack of beer, or even small panniers, in a pinch.

Speaking of bar bags, there are some handlebar bags that are attached with a handlebar clamp. Those are fine for light loads, but having the weight way up high and attached directly to the handlebars is obviously not ideal. Handling is bound to suffer. So the French constructeurs placed their handlebar bags down low on a rack mounted just above the fender. In this position and with proper geometry, one could carry a sizable load in the bag. Some cyclists with smaller frames eliminated the rack altogether and had their bag resting directly on the fender.

Porteur Racks

There are those who need to carry larger loads like groceries, a case of wine, large piles of books or newspapers, etc. The Porteur rack is designed for them. The Porteurs were Parisian newspaper delivery men. They piled 50 or 100 pounds of papers on the big front racks of their special bicycles and delivered them to news stands around the city. Those with a good route made a very comfortable living indeed. And many commissioned custom built porteur bikes from Alex Singer or Goeland or other great constructeurs. Here's an interesting collection of photos of the bikes they used.

These racks are very popular and rarely in stock, but by mid-summer we should have several hundred arriving from a new factory and a steady supply from then on.

A less expensive option for bulky, but not heavy, loads is a front basket of the type made by Wald. We'll start stocking the new wood-bottomed version of these in a few weeks.

Camping Racks

Camping racks are designed primarily for front panniers and will support a heavy load for bike- based camping trips. The best of them is probably the Nitto Campee rack which has removable pannier frames so it can also serve as an everyday rack. Note that the panniers are attached low on the bike for improved handling. Like the porteur racks, these are often out of stock.

Racks with Integrated Decaleurs

Decaleurs are quick release mechanisms for handlebar bags or baskets. We stock several types which I'll write more about in the future. The important point is that they are not a substitute for racks, but rather accessories for bags. They allow you to simply lift your handlebar bag off the rack and, using the shoulder strap, stroll into the cafe or shop with it.

We make two racks, versions of the rando and of the constructeur racks, that have integrated decaleurs. These eliminate the fiddling and setup of a separate decaleur and are lighter and sturdier than having two separate components.

Mounting Racks


Probably the most common rack-related question I answer is, "Can I mount racks and fenders to the same eyelet?" Of course you can. All you need is a slightly longer 5mm screw and a few washers. Since the eyelet on forks with only a single eyelet is behind the dropout, the rack tang will rub the paint off the fork unless you space it out with a couple of washers.

The constructeur and porteur racks we now sell are undrilled and designed to fit right on top of the fender of either 700c or 650b bikes. Mounting the rack low improves handling and appearance. This is the way custom racks from the great constructeurs were designed. So the tangs at the bottom of our racks are undrilled. The installer drills them for a perfect fit for your bike. But we find that many customers are hesitant to take a drill to expensive stainless steel, so our new production racks will be pre-drilled with either two or three mounting holes. We will still offer the racks with integrated decaleurs undrilled. That may not satisfy everyone, but most should be happy.

The racks must also be attached at the fork crown. Again, the new racks will be pre-drilled, but the current versions can be custom drilled and mounted either to the brake bolt or, preferably, with a daruma bolt. We will soon have a VO brand daruma bolt so the chronic shortages of Honjo darumas will be alleviated.

Nitto M12 racks mount to the hole in the fork crown and to the canti-studs. For years most folks mounted them to the studs with regular canti bolts, but you had to check the bolts occasionally because the could loosen. And the last thing you should do is over-tighten the bolts since that deforms the brake studs and causes endless troubles. Now there are special rack mounting bolts made by Nitto and by VO. These are based on the bolts French constructeurs used to mount racks on center-pull studs. They have a stud on each end and a hex head in the middle. While not strictly necessary, they do prevent the loosening of brake bolts and they look nice.

The last mounting issue relates to the VO Rando racks. These were originally developed specifically for the VO Randonneuse frames. We found that many cyclist wanted to adapt them to other bikes with caliper and centerpull brakes. This is easy to do with a p-clamp substituted for the fork eyelet. A few custom frame builders have also used them on their frames, adding eyelets in the proper position. The question I often get is if they can be attached to lowrider bosses. Sorry, but no; they work only on forks with the VO specific eyelets or with p-clamps on other forks.

Phew! That's enough about racks for a while. And I apologize that we are out of half the stuff I just wrote about. But it's all on order or on the way. Demand has again outstripped production, but it's only a temporary problem.

Closed on Memorial Day, and Frame News

We'll be closed as of 4pm today and reopen on Tuesday, May 28.

The photo is of the VO Polyvalent (multi-purpose) frame described here. (Tom was fitting one of the new Taiwan-made racks to it.)

As soon as we get a firm delivery date from the factory we'll start taking deposits for the first production run. I'd guess that they will arrive around the end of September. The main differences from the photo are that the color will be dark gray and there will be an extended head tube. It will be available in four sizes initally, 51 x 54cm, 54 x 56cm, 57 x 59cm, and 60 x 61cm. Remember that it's designed for city bars so the top tube is longer than on a rando frame. We'll add more sizes on the next run.

The introductory price for the frame and fork will be $400, plus shipping. That price will go up on subsequent production runs.

The mixte frame is also progressing nicely. It will initially be available in 51, 54, and 57cm sizes. We don't have pricing yet.

We are also working on the lugged Rando frame and have decided that the introductory price for that frame and fork will be $750. With luck they will arrive just after the Polyvalent frames.

Anyone doing any special bike related stuff over the long weekend?

Racks at Work

David sent the photo above of his bike with a bucket of about 80 baseballs, which he regularly transports on a VO porteur rack. A baseball weighs just over 5 ounces, so that's more than 25 pounds.

He writes:

Thought this would be a good shot given that some of the blog folks have asked about the capacity of your racks. I often take this with my 12 y.o. old son to do batting practice after work. So that’s a bucket of about 80 baseballs...

The bike has tons of VO things on it. It’s from a garage sale but at this point I’ve replaced just about everything except the frame. Works really well. The fork has quite a bit of rake to it so it seems to carry heavy loads on the rack with little effect on the handling. The whole bike lives outside and has required zero maintenance or fiddling for about three years, other than just topping up the air in the tires. I do try to store it on the porch when it’s about to rain.

Anyone else have an interesting photo of stuff on a VO rack?

Happy Places

I was amused by one recent news story and angered by a recent opinion column. Both stories have just a little to do with bikes.

Numerous papers, magazines, and sites have written about a study by the Organization for Economic Co-Operation and Development listing the world's happiest countries. This is obviously difficult to define, but their methodology seems reasonable. The top three countries are Denmark, Finland and the Netherlands. The first thing I noticed is that all three are countries that have above average bike ridership.

Here are the top ten:

• Denmark
• Finland
• Netherlands
• Sweden
• Ireland
• Canada
• Switzerland
• New Zealand
• Norway
• Belgium

And here is another interesting article, this one about a world map of happiness. Again, many of the top countries are very bike friendly. They also generally have strong social safety nets, pretty good environmental policies, and well developed public transport. But the main lesson we should take from this is that riding bikes makes people happy.

On a less optimistic note, did anyone read this piece by George Will where he takes new transportation secretary, Ray LaHood, to task? Here is a bit of it:

Does LaHood really think Americans were not avid drivers before a government highway program "promoted" driving? Does he think 0.01 percent of Americans will ever regularly bike to work? Intercity high-speed rail probably always will be the wave of the future, for cities more than 300 miles apart. And as for Portland ...

So even 0.01 percent of Americans riding bikes to work is unrealistic?

Let me say right off that I don't normally read George Will and I certainly have never agreed with him. But as members of the jabbering class go, I once thought he, at least, had some intellectual chops. No more.