26 February, 2023

A Wheeled Legacy

by Connor

About a year and a half ago, Andy send in an email with a request - a set of Velo Orange downtube decals for an old cantilever Pass Hunter. This isn't an uncommon ask for frame repaints, so we sent them out. Fast forward to just the other day when I received a follow-up email from Andy, this time with an update of his restoration job.


Repainted and rebadged, the bike had obviously been cared for and the attention to detail was apparent. More notable than the photos of the bike, however, was the story behind it.

Working at a bike company, you see your product leave the warehouse everyday. It's headed every which way all over the world, bound to be installed and used by the riders that enjoy them. You often don't think of where this frame is headed and where it's going to be ridden, or what kind of bike those fenders are going to be installed on as they head out the doors at VO. My correspondence with Andy was a reminder that our bikes are often an extension of ourselves, our personalities, and our stories. Here's Andy's story

Trigger warning: This post contains discussion of a recent loss and may be difficult for some readers.


-----------------------------------------------------------------------------------------------------------

"The bike holds a special place for me. June 2021, I reunited with a friend, John "Host" Lynch, who I hadn't seen since the beginning of the pandemic. We had one of those epic rides together... single track, gravel, road, rail trail, all wrapped up with great conversation against a picturesque sunset against the Catskill Mountains near my home in Kingston, NY. Tragically, as we came close to completing our loop, I watched in horror as he was struck by a car and run over. John is no longer with us.
His family gifted me the bike. John was one of those special people who's lifestyle closely matched his values in every respect. As a matter of principle, he didn't own a car and rode everywhere. The Pass Hunter was his everyday commuter, grocery getter, weekend camper, and vehicle to visit his partner who lived over 70 miles away. He originally found it second hand at his local bike coop. As you can imagine the bike was worn and loved and ready for a fresh beginning. I needed a project to help make sense of the trauma of losing a friend. I set my mind and heart to the rebuild.

After stripping it down and removing its well-worn parts, I had a fresh powder coat applied - translucent copper from Prismatic Powders. When the sunlight is angled to the frame just right, a deep golden earthy glow comes forward. The gold anodized bolts with home-cut leather washers, and brass stem spacers from Blue Lug, accent the glow.
I outfitted it with your Nouveau Randonneur Bar, a Brooks saddle, Origin 8 flat pedals, Tektro Onyx cantilever brakes, and Grand Cru 50.4 BCD crankset, I sought to combine comfort and reliability for long distance rides and mix the classic aesthetic of your parts with a some of my favorite tech from the late 1980’s and early 1990’s. It has a vintage Suntour XC derailleur group, shifters, and brake levers. The rims are vintage Nashbar now encircled with ginger colored Gravel King SK tires. Maroon padded bar tape from Neubaums, matching vintage cable housing sourced from the Bicycle Recyclery, topped off with gold cable cherries. A rust orange VO/Roadrunner Randonneur Bag is on your Randonneur front rack, and there's a matching tool roll on the seat. I love how the bike evokes the colors of autumn in the Northeast - my favorite time of the year and place to ride.

VO Facetted Fenders have been added since these pics were taken. And, I'll be building up a dynamo hub wheel soon for lighting.

How does it ride? Really excellent, almost everywhere! It's buttery smooth on pavement and light gravel, but also handles mellow single track and some of the rougher farm and carriage roads I like to visit with ease. It's by far the easiest bike I've ever owned... it just wants to go. Not super fast, but steady and efficient. Very welcoming.

The Blue Lug brass stem cap is engraved with, "Be My Guest." John's nickname was "Host." He had a lovely reputation for welcoming people into his life, making them food or a spot of tea. Accepting the trauma of witnessing John's death reminded me that life, even when difficult, is a gift. We have only to accept its hospitality."



-Andy

-----------------------------------------------------------------------------------------------------------

Thank you, Andy, for putting together this amazing Wheeled Legacy for your friend John.

Andy felt comfortable sharing this incredible story with us and agreed that it was worthy to bring to you, to remind you that our bikes are extensions of ourselves, and even if we don't go on, our bikes often do. For some of us, they can represent memories shared, hills and hardships conquered, and rides yet to come. For Andy, this bike represents all three.

08 February, 2023

If you can only have one bike, make it a tourer!

 velo orange polyvalent on tour in europe

The versatility of a touring bicycle like our Polyvalent is one of its greatest attributes. With a few simple modifications, one bicycle can easily be used for a variety of different riding styles and purposes. Let's take a look at how to set up one bike for exploring gravel roads, touring remote areas, everyday commuting, and even a road ride or two!

What makes a Touring Bike?

Well, touring bikes at their core are designed to be comfortable, capable, and confident in a wide variety of terrains and environments. They are designed so that the rider can focus on the experience rather than on fiddling with equipment and worries about component robustness. 

velo orange polyvalent low kicker with road runner bags accessories

Typically speaking, traditional touring bikes are set up to have neutral geometry, longer rear triangles, and wide tire clearances. With that set-up, they can excel admirably at almost anything that is thrown at them.

From a technical standpoint, touring bikes have a headtube angle of between 69-73 degrees, with the steeper angle allowing for a slightly more forward-loading bias. In practice, it doesn't really matter as, I assure you, you will get used to whatever you're riding in a few miles. It's when you get even steeper (track bikes) or more slack (progressive mountain bikes) that handling and geometry can be more of a factor in your comfort over the long haul.

velo orange bike crossing a stream with fully loaded panniers

Touring bikes also usually have longer rear triangles to allow for heel clearance for rear racks and panniers. A longer wheelbase also makes the bike more stable, again, making it easier to ride for longer distances than something with the rear wheel tucked tight behind the seattube.

Touring bikes typically have all sorts of mounts for fenders, cargo, multiple bottle cages, lighting, kickstand, etc...almost anything and everything! This will be important in the next coming sections. 

velo orange piolet prototype with cargo bags

Lastly, touring bikes have generous tire clearances. Bigger tires use a bigger cushion of air which aids in traction, comfort, and reliability. Imagine hitting a rock with a 23mm tire vs a 48mm tire. The 48mm tire will deform and squish around an obstacle and a 23mm won't, and you'll have a higher risk of a flat. Over a couple hundred miles, that extra cushion of air is a welcome addition.

Simply put, touring bikes have geometry, clearances, and design to eat up the miles comfortably and safely. 

Ready for Gravel?

velo orange pass hunter with road runner bags biggish and day tripper

In recent years, Gravel is everything: gravel shoes, gravel pumps, and gravel helmets. It allows you to explore the back roads and paths less traveled, and provides a great way to get off the beaten path and experience the beauty of nature - all ideally without any worries about traffic or cars.

The nice thing is that in actuality, you don't need much to get into riding gravel. Just a bike with neutral geometry, comfortable fit, and generous tire clearances. Sound familiar to a touring bike? 

As far as building up a touring bike for gravel, I'd forgo fenders and racks and just accept getting dirty and having to strategically strap on bags to the bike. Otherwise, I think you'll be hard pressed to find any big differences between a gravel bike and a touring bike.

velo orange low kicker polyvalent

For cargo, the extra nubbins and mounts that a touring bike has are useful for carrying extra water on the fork blades.

Of course, the caveat being if you're racing, then you'll want lighter everything so you aren't carrying any weight that isn't absolutely necessary. But that can lead to its own problems with components that may be more susceptible to a catastrophic failure all in the name of saving a couple minutes. Which could mean getting paid or not getting paid, I get it honestly.

When Touring Bikes Aren't Touring, They're Excellent Commuters

velo orange camargue with wine and porteur front rack

Commuting by bicycle is a great way to stay active on the daily and reduce your carbon footprint to get to and from work and around town. The vast majority of my own riding is just doing things around town: going to the library, hitting up the playground with the family, picking up take-out, grabbing quick groceries, late night snacks, running down the hardware store, etc... The cool thing about a touring bike is that there are no modifications you need to make to make it a good commuter!

The only difference is amount of stuff you need to take. Instead of 4 fully loaded panniers on your racks, you might just have one, or two for a trip to the farmers' market. Riding position, tire choice, tools, component selection, racks, and fenders can all stay the same.

velo orange polyvalent with front rack and porteur bag

For a commuter or tourer, I value simplicity of maintenance, comfort, and utility. So you can see how one could be good as the other with little to no changes.

Transforming into a Randonneur is Easy

velo orange polyvalent with front campeur rack in germany

While I can't necessarily say that a true touring bike could be on the same echelon as a full-on roadie, touring bikes do make excellent randonneuring bikes. 

They say randonneuring is just touring with more paperwork - which is hilarious. As far as making it a true randonneur for brevets, there are some specific considerations you need to be within the RUSA (Randonneurs USA) safety requirements: that includes having a rear light, front light, and reflective vest - honestly, good things to have anyway for touring and commuting.

As far as other gear, I'd simply drop a rear rack and only have a small front rack or just a bikepacking style bag like a Biggish, Mini Rando, or Burrito. Basically enough room for just the essentials like nutrition, tools, medications, and any extras you personally need.

velo orange burrito front bag on polyvalent

Pro-tip: you can make a paper cue sheet holder using a binder clip and a zip tie.

In conclusion, with a few simple modifications, one bike can easily be used for a variety of different riding styles and purposes. Whether you're gravel riding, touring, or commuting, a versatile bike is the key to making the most of your riding experience. Take the time to understand your needs, and set up your bike accordingly.

I'll also note that VO Frames are currently 20% off, so if you are interested in building up your next touring, randonneur, gravel, and commuter, now is the time to save some cash!

27 January, 2023

Cycling Media in the 21st Century

by Scott 

I consume a fair bit of media I think. I read a couple newspapers (online) every day, check into 5-6 cycling websites, and listen to a number of podcasts when out and about. One interesting interview was with the CEO of Outside Media. The main discussion was about the state of outdoor media, and the fact that Outside now owns almost all of the big outdoor publications, and the impact of that on what we read and view.

                                  (Derek and Connor consuming media the old fashioned way)

The cycling industry and media have certainly changed in the 11 years I've been here at VO. When I started, there were at least 4 magazines (actual print ones) that we advertised in, sent test product to, or at least paid some attention to, as our products could get a mention in any of them in any given issue. There were probably 8-10 blogs that paid a lot of attention to our niche end of the cycling world.

Over time, the magazines all dropped off either in a physical format or all together. I've also seen a number of the blogs I used to read dwindle as well. In the case of personal blogging, I think it's a matter of having something to keep the author motivated to continue writing. Some blogs were at the point of sustained content for 10 years back in 2012 already. It takes a lot to keep that writing up, especially if it is not your day job. And in many ways, producing and maintaining the blog takes time away from family or riding your bike. Plus, people evolve, they change what they are interested in, and what they are interested in writing about. If you're a keen vintage cycling fan, 10 plus years of blog posts is a bit daunting to keep up fresh content. (Shout out to Guitar Ted who's kept at it all these years with fresh content daily). Also of note is that the Velo Orange Blog has been going for over 15 years!

The last few years have seen a rise of the YouTube channels related to cycling. Russ Roca at Path Less Pedaled, Katie Kookaburra, and Henry Wildberry are a couple of the folks that I look at for some interesting insights (I'll admit, I'm not a huge consumer of videos). I think Russ is one person who really gets our niche of the bicycle market, so it's always interesting to hear his take on things.

You can also see the rise of social media, in particular Instagram, explode in the past several years and how that has changed the media world. As shown with YouTube, visual media is popular and seemingly lots of people are interested in our content, through that medium.

                                      (Some cycling media we have collected over the years)

So I present to you, the loyal follower and reader of this blog, where do you go for news and cycling entertainment? Are you a devout reader of a blog, or watcher of video, or listener of podcasts? Are you joining Substack for niche written content?  Do you even care to get cycling related content online? Let us know in the comments below or send postcard answers to us at:

Velo Orange

6730 Dover Road

Suite 113

Glen Burnie, MD 20906


11 January, 2023

Practicality vs. Sentimentality - Does it Bring You Joy?

by Scott

A lot of us have attachments to items we own that don't make financial sense. I'm not a sentimental person, by and large. I have a few objects that I hold near and dear to me, but in the case of the house catching fire, my wife and I will grab the cats and the wedding album and that's about it. 

I bring up the idea of bonds and sentimentality and how it pertains to bicycles. We get a lot of folks coming to us to help keep their older bikes going. We've got the various bottom brackets and headsets to keep those older Peugeot UO8s and Schwinn Le Tours rolling along, handlebars to replace the going-on-40-year-old original bars, and all the fixings to make them unique to the rider. I'm curious as to whether folks are keeping them going in their original shape, setting them up as a commuter bike with newer components, or something in the middle like changing the bars and consumables for a spiffy and novel weekend rider.

The larger question of whether or not a bike should be restored to its shiny and new glory, simply spruced up and ridden, or hung on the wall? The answer is a resounding...."it depends"....

There are so many factors that goes into a decision like this. Does the bike have sentimental value, significant historical value, or is it just a fun project to work on? These decisions aren't easy especially when it comes to a budget.

There is no question that certain bikes hold more or less value to us as individuals - for example, Adrian and Igor have matching Campeurs that they used for their Denmark wedding tour. You can read about his and her Forever Bikes here. 

A Peugeot UO8 is perhaps the best bike to use as an example here, as it is a re-occurring character at VO HQ. Peugeot made thousands and thousands of these bikes during the bike boom of the 60s and 70s. They were mid to low end of the range with Simplex shifting, Mafac brakes, and cottered cranks. They weren't anything special, but they were affordable, had cool graphics and Aztec lugs, and it got people on bikes - and that's what made it an icon of the era.

Photo courtesy of DJCatNap

Would a UO8 be my first choice for a restoration? Probably not. But if a particular UO8 had significance in my life, like it was a beloved family member's, a first bike, or something of that nature, well that is a whole different story. Now that specific bike has significant sentimental value and that doesn't necessarily have the same price tag as a random UO8. I would absolutely argue that it deserves either a full restoration or moderate refurbishment to make it safe to ride - budget allowing. Replacing consumables like chains, brake pads, handlebar tape, and tires goes a long way.

Adrian's Bertin with Campagnolo Nuovo Record

I see outrageous pricing for original Simplex derailleurs and hear stories online of collectors paying huge amounts of money for period-correct parts. Is it to recreate this bike from 1973 and then display it or is someone actually riding this bike? For a lot of people, it's a totally worthwhile exercise to go and take an older frame, fix it up, put a new saddle on it, new brake pads and cables and then go out and use it. But I think one has to admit that, like many things, bikes have improved over the last 50 years and to just blindly restore a bike back to its original condition may not be the best decision.

Do you restore old bikes for sentimental reasons? Do you restore them to stock condition or do you make them more modern? Let us know in the comments!

09 December, 2022

VO's 2022 Gift Guide

As the end of the calendar year approaches, one's mind turns to gifts - gifts for yourself, gifts for loved ones, and people who help make your life just that little bit more special. Here at VO, we wanted to give some suggestions for gifts that aren't necessarily reliant on knowing what sort of bottom bracket your friend has on their bike or if their bike has flat or post mount disc brakes. So here are some gift ideas for 2022 that should suit any and all of your cycling friends!

Bottle Cages

We offer a variety of stainless steel bottle cages that will add a touch of class to any bike.

Runwell 15 mm wrench



These 15mm Wrenches come in Silver or Gold finish and have a unique 15 degree angle to the head, so that your fingers don't get jammed into the fork or seat stays when tightening or loosening your hub nuts. We also have a To-Go version with a shorter handle to more easily fit in portable toolkits.

Burrito Handlebar Bag

The Burrito Supreme Bag fits onto any handlebar using two straps around the bars and a third strap around the headtube to keep the bag from bouncing. With a capacity of 2.6 L, it will hold tools, wallet, phone, tubes, and pretty much whatever other small things you want. 

Bell

The classic choice in safety, a VO bell works on virtually any bike and is a wonderful way to announce your presence along the bike path.

Rough Stuff Fellowship Books 

These Rough Stuff Fellowship books are perfect for reading/looking at the photos while sitting next to a warm fire and dreaming of open roads and green lanes to ride through next summer. 

Bottle Opener with 10 mm Wrench

How many things on your bike need a 10 mm allen wrench? A few, but you can certainly use the Runwell Bottle Opener while you think of all the ways this could come in handy.

VO Hoodies





Want to stay warm and stylish this winter? Grab one of our Hoodies and stay warm and look good while waiting for spring to arrive.

Var Compact Multi-Tool


You should always have a quality set of tools out on the trail. These VAR Multi-tools are lightweight, compact, and can fix most issues you have on the side of the road.

Austere Cam Straps

These super cool US-made straps from Austere Manufacturing use a CNC machined body and a titanium pin for light weight and incredible strength. The strap is 3 feet long and can be used to tie down a myriad of items on your bike or elsewhere.

#8 Stainless Steel Opinel Knife

A classic knife, we've sold Opinel Knives for almost 10 years because they work and they stay sharp.  This Stainless Steel model is great for folks who might be around salt water or who don't always wipe their knives down after using it.

E-Gift Card

VO E-Gift Cards are perfect last minute gifts! It's totally electronic and guaranteed to fit. 

----------------------------------------------------------------------------

Note: Shipping companies are getting into their super busy season, so while we can say your order will leave our warehouse asap, we cannot guarantee there won't be shipping delays.

02 December, 2022

Drop Your Drop Bars!

by Igor


We've already extolled the virtues of changing your handlebars to change how your bike feels (in fact, we've even done a how-to video!). Changing from drop bars to flat or upright bars changes your riding position, the bike's handling, and the fun factor to turn a stagnant bike into a brand new one - all without spending a ton of dough. So let's dive into my Pass Hunter where we dropped the drop bars for some Seine bars!


This bike mostly gets ridden off road on lighter duty local trails, double track, and to and from the house. I have a road bike and an all-rounder, so I don't need fenders and dynamo lighting and all the gizmos, so something simple and unencumbered is what I was looking for.
 

In the effort to simplify, I opted to go with Sensah 1x shifty bits: CRX Shifter, SRX Rear Derailleur, and 11-46 Cassette. It's simple and without fuss.
 


Going with these components also gives me the ability to switch back to drop bars using the Sensah SRX Integrated Shifters if I want to change it up in the future. They're all a really good value and not a huge investment to try out a flat or drop bar system.

18 November, 2022

Introducing the Granola-Moose Handlebar!

by Igor


The Granola-Moose is a beautiful one-piece bar and stem combo. It's based off our popular Granola Bar and features an integrated 1 1/8" clamp for threadless steerers. This integrated design makes for a truly buttoned up and streamlined appearance on your city, touring, or mountain bike.


Made from 4130 chromoly steel, this bar has a bunch of details that really makes it special. The steel is heat-treated, the tubing of the bar has multiple butting profiles, the front cross bar is slightly flattened for your lights and/or gizmos, and the system has been tested to stringent MTB standards. All in all, the Granola-Moose makes for a fun, unique, and comfortable upright handlebar.

It's available in both Silver and Black finishes on our webstore! Check it out now!



02 November, 2022

2022 Philly Bike Expo Roundup

by Connor

While VO didn't display at this year's Philly Bike Expo, Derek and I did go in place of the company, sporting our new VO Hoodies, scoping out this year's event. This year's turnout was really energetic, and we're happy to see participation in events like PBE is back! Below are just some shots from this year's expo we managed to grab. Enjoy!

SWOOD Cycles came out sporting full bikepacking regalia
 

Royal H had a few bikes highlighting some of our gear, including this Mixte with our Hammered Fenders, 31.8 Quill Stem, Nouveau Rando bars, Sensah SRX kit, and Touring Pedals!
 

This Mars Cycles frame caught my eye in particular, as its paint was matched to replicate a San Pellegrino bottle. Super Classy!

This fixed-welded Titanium rack was apparently a custom job requested by a customer at Blaze Cycles, a Moab-based Ti company. With Pinion Belt Drive, dropper routing, and custom touches throughout, the bike definitely was something to behold.

A number of months ago, Fergus at Ritchey reached out looking for a set of Growtac Equals for a project coming up. We didn't get many details at the time, but it would seem they made it onto this limited-run colorway Outback, and the blues we sent looked right at home!

I've been a Ritchey fan for well over a decade now, and this green/yellow colorway of the Breakaway 'cross frameset is still my favorite scheme to date- to me, it evokes Lotus Racing style without being too overstated.

While admiring how well-installed our Hammered Fenders were on a Handz Bikes road frame, Derek and I noticed this special touch on a mountain frame of theirs- a section of a stainless rotor, cut to the diameter of the seat and chainstay and welded on the non-driveside, then painted to match. It's just one of those custom touches that makes smaller-fab shops so special.

While browsing the Chapman Cycles booth, I couldn't help but notice this sage-green colored road bike with Chapman's own hand-made V-brakes. Note that the straddle cable isn't actually a cable, but a spoke.

Our friends Tommy (Cutlass Velo) and Chris (Bishop Bikes) were rep'ing our Baltimore area, showcasing their craftsmanship and attention to detail.

Having attempted harlequin tapejobs on bikes time and again with minimal success, I thought this custom paintjob on a Dean frame was really unique and tastefully done.

 

Alex Meade has been building custom frames for more than 20 years, and also produces his own jigs for folks looking for quality framebuilding tools. He's been a longtime customer of ours and his work is meticulous.

Doing a walkabout in town afterwards is, of course, necessary. Philadelphia's a great city with a lot to see. If you finish up at next year's expo early or get to extend your trip, I'd suggest staying downtown and checking it out - especially Reading Terminal Market for the pumpkin rolls.