tag:blogger.com,1999:blog-24415034.post7085998730357924154..comments2024-03-18T10:19:55.782-04:00Comments on The Velo ORANGE Blog: Wrapping Handlebars Alex Singer Style, Re-PostVelo Orangehttp://www.blogger.com/profile/02835615331417822722noreply@blogger.comBlogger8125tag:blogger.com,1999:blog-24415034.post-15158896116676604352014-02-26T14:52:52.215-05:002014-02-26T14:52:52.215-05:00I wrapped my bars from the bar end to the stem and...I wrapped my bars from the bar end to the stem and I've found that the shellac does an excellent job of sticking the end of the tape. If it comes loose a bit of carpenter's glue-the white stuff-will stick it forever.<br />Phil Brownphilcycleshttps://www.blogger.com/profile/07037641086503534960noreply@blogger.comtag:blogger.com,1999:blog-24415034.post-79828817270879411502014-02-26T13:55:16.855-05:002014-02-26T13:55:16.855-05:00I've been doing this for a while, where the ta...I've been doing this for a while, where the tape meets i just put a tiny strip of tape or two over the exposed part. I wrap my cloth tape really really really tight and never encountered irregular overlap. Never had a problem with the tape curling either.<br /><br /><a href="http://www.flickr.com/photos/99266278@N02/12798196313/" rel="nofollow">http://www.flickr.com/photos/99266278@N02/12798196313/</a>Anonymoushttps://www.blogger.com/profile/14478592839467351180noreply@blogger.comtag:blogger.com,1999:blog-24415034.post-88942299224151807172014-02-25T22:21:22.152-05:002014-02-25T22:21:22.152-05:00Is it me you want to answer about meeting the two ...Is it me you want to answer about meeting the two sections in the middle? That is perhaps the easiest part. I put a couple short pieces of tape across behind each brake, per normal procedure, then just wrapped from the bottom of the bar to the brake and from the top of the bar to the brake and ended the free ends of the tape under the hoods. You roll the hoods back, like normal, and just stick the cut ends where the hoods will cover them and roll the hoods back. It helps to use tape with a pretty grabby adhesive on it, otherwise you might have to help it stick somehow to keep it from working out from under the hoods. I've never had a problem with it working out from under the hoods. With the harlequin wrap, you get 4 cut ends (not counting the short pieces, 6 or 8 counting them) under each hood. Sounds like a lot, but it really works out OK. The hood is slightly bulgy afterward, but you don't really notice it. I used 2 or 3 coats of thinned shellac. I didn't want the shiny "plastic" look of tape fully filled with shellac. I mostly wanted to make the tape less water absorbent, a bit more durable and a bit less likely to absorb dirt.Mark Holmnoreply@blogger.comtag:blogger.com,1999:blog-24415034.post-8720396200670074212014-02-25T19:15:19.133-05:002014-02-25T19:15:19.133-05:00Would be nice to see how you mate up the two secti...Would be nice to see how you mate up the two sections in the middle.Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-24415034.post-73674568462113365932014-02-25T18:39:32.601-05:002014-02-25T18:39:32.601-05:00Try it this way.
https://www.flickr.com/photos/415...Try it this way.<br />https://www.flickr.com/photos/41506239@N02/4450796265/in/set-72157623664497206Mark Holmnoreply@blogger.comtag:blogger.com,1999:blog-24415034.post-48703500139998994092014-02-25T17:38:21.875-05:002014-02-25T17:38:21.875-05:00I've taken to doing all my bars in a 2-color h...I've taken to doing all my bars in a 2-color harlequin wrap now. Takes some learning, and 4 rolls per bar, but I'm getting better at it. It's similar to this in that you start from the ends and go to the brake lever. And I agree, shellac pretty much eliminates any curling.Velomannhttps://www.blogger.com/profile/11735152500677012292noreply@blogger.comtag:blogger.com,1999:blog-24415034.post-15253745436294449142014-02-25T14:09:44.113-05:002014-02-25T14:09:44.113-05:00If you start from the stem and shellack the cloth ...If you start from the stem and shellack the cloth tape sufficiently, the "curling"* problem is eliminated. My bars are all taped from the bar end to the stem, shellacked and with hemp or leather twining. I like the look of the twining. <br /><br />*Some would like to see the curling problem eliminated from the Winter Games!twotiredhttps://www.blogger.com/profile/08489482088293175624noreply@blogger.comtag:blogger.com,1999:blog-24415034.post-85078978874026200902014-02-25T13:27:36.672-05:002014-02-25T13:27:36.672-05:00can you show a pic of what happens where they meet...can you show a pic of what happens where they meet at the brake lever?<br /><br />being cheap, and enjoying reusing old tape as much as possible, i like the idea of using two half rolls of tape for each side...<br /><br />thanks.Anonymousnoreply@blogger.com