03 May, 2013

Pass Hunter Photos


Here are a few photos of Pass Hunter Prototypes. Basically this new frame is a randonneuse, but with canti brakes. The cantis allow wider tires with fenders and more powerful braking. The Pass Hunter is built using slightly lighter tubing than the Polyvalent or Campeur. It has mid-trail geometry, much like the Campeur.

The term "pass hunter" refers to the sport of riding over mountain passes, more popular in France and Japan than here. Rules are explained on this page. In addition to randoneuring and pass hunting, the Pass Hunter would make a nice sportiff or even a fast credit card tourer. We hope to have them in stock in early fall.
Casey built this one up as a lightweight
A new fork crow and plenty of fender/tire clearance
The fork crown in red
Cable stop with adjuster and integrated rack bosses
Seat cluster with semi-wrap stays
Scott is building this one up as his rando bike. 
One down tube decal, or two? Red or blue paint?

71 comments:

Don said...

Red, one decal on top if you must. This one may be impossible to resist.

Aside from the canti bosses, how else is it different from your last randonneur? What's the rear spacing?

el viejito said...

Red with two decals!!!

Unknown said...

Blue with one decal. Any thoughts on what the price will be? Can't wait and great job.

Anonymous said...

Blue, one decal on top!

Scot Hinckley-Danielson said...

The colors are lovely, but I'd still like to have an orange Velo Orange.

Anonymous said...

Not a fan of either color, and two decals. One decal looks too modern in a bad way. (One decal might as well say VeloOrange.com.)

John I said...

Red, two decals, and a 62cm size. I totally dig the biplane fork crown. Reminds me of my old Nishiki Professional. And the semi-wrapped stays are a nice touch. Classy frame.

Anonymous said...

Blue.. one decal. It's perfect.

Scott Loveless said...

Everyone knows orange is the fastest color. But red's a close second.

VeloOrange said...

Don, The spacing is 130mm. This is an all-new frame, not an update of the Rando, in short it's lighter, stiffer, and more refined. We'll post geometry and final specs when the frames arrive.

Annon, A singe top tube name was common on constructeur bikes from the 1940s into the 1980s. Though the name was often hand painted, so not a decal.

George C said...

Happy to see a threadless headset, although I know that will not be a universal opinion here! 1 1/8 inch headset sizing?

Anonymous said...

Orange!

Anonymous said...

Red! 62cm please!

Robert said...

Blue. But, is it weird to point out the shimmer? I would much rather prefer a flat blue instead of shimmered but, great nonetheless. I see VO doing a blue bike over a red one any day. My thoughts..

Adam said...

Red!

Anonymous said...

+1 on threadless.
keep it reasonably priced like your other frames and offer build kit options.

Anonymous said...

That's a beautiful frame. I love the fork crown and lugwork. I think I prefer the red (could be that I already have a blue bike.) I wouldn't be opposed to a single decal on the top of the downtube. It's a little different and I personally haven't seen many like that... sometimes less is more imho. You may be able to tempt me, although I typically prefer quill stems/threaded headsets. I keep looking at my old road bike and old MTB wishing I could combine some of their details into the perfect combo for a single and affordable on/off-road bike (lugged steel with downtube bosses, canti or v-brake posts and a few other braze-ons for light loads) This might be what I'm looking for. Parting with my project bikes to make room will be the hard part.

Anonymous said...

Red - one decal.

Mr. Beattie said...

650b wheels for 54cm and smaller? One decal on the top of the downtube would look good.

I too like orange, non-metallic. Like the old Kona 'Jake the Snake' or Black Mountain Cycle's 'Monster Cross' orange crush. But I understand if that's not what you guys are going for.

drew said...

Ooh- tantalizing! This one may well be my first Velo Orange frame- especially if you listen to the throng and make it ORANGE! (Otherwise, blue gets my vote.) I prefer the classic single top decal, but honestly the decals don't bother me much either way. Cannot wait to see specs; kuddos.

Anonymous said...

red is great and one decal!

Anonymous said...

red, two decals. also is the red flat red? +1 for the orange VeloOrange though I know it was done before...

Felkerino said...

Blue, one decal.

Anonymous said...

Red with one decal, please. That's a lovely bike. Not getting rid of my Rando any time soon, but should I ever need another...

Hal said...

Red, two decals.

Phil said...

Red and single decal. But why the move away from the low trail geometry? This seems strange from a company inspired by classic french bikes.

blobofoblivion said...

red! single decal!

Dan and Pam said...

That red is great, I hope you make that color., been waiting for this bike for a while and am not disappointed. Nice work.

Dan

Blogan said...

Blue, and I'm not particular about the decals. I've never been a fan of red bikes, though this one looks better than most.

MtnMaven said...

Awesome looking frame.I want!


to your questions. My vote is 1 decal, red frame.

a botanist said...

I've been anticipating this frame for a while... looks great! My vote is red.

Quick question... is this welded or lugged? Not partial to either, just curious.

Eric Daume said...

I'm very disappointed to see that this bike might be threadless. As a tall guy, I'm usually at the top of an uncut fork, and/or I get tired of playing the "cut/don't cut" game with the fork. I miss the easy height adjustment of threaded headsets.

eflayer said...

two decals. i don't want others having to straddle my top tube in order to know the cool brand name of my gorgeous bike. has any builder ever done a single decal on top of the down tube? i am for all sorts of trend setting, but not the single decal thins.

Anonymous said...

Why no low trail?

Anonymous said...

This could be the frame for me. I prefer the red with 2 decals, but the blue looks good too. Any ETA?

Question: Previously you said this would be standard diameter (1" top tube) tubing but slightly thinner wall thickness (0.8/0.5/0.8?). How does that make it stiffer than the Rando? Has this changed to oversized tubing?


"This is an all-new frame, not an update of the Rando, in short it's lighter, stiffer, and more refined. We'll post geometry and final specs when the frames arrive."

Unknown said...

Gorgeous lugs. I like both the red and the blue, and I don't mind the shimmer on the blue; reminds me of my old trek 620 (which is now powder-coated orange). Keep the decals to a minimum, or put them on over the clear coat so folks can take them off.

Anonymous said...

Beautiful frame, but threadless kills it. There are too many threadless steel frames out there (Surly, All-City, etc.) and not enough threaded at a reasonable price. I've been waiting for this frame to replace my well-worm Surly Pacer so I can run wider tires and get the adjustability (and classic looks) of a quill stem. Please tell us you'll offer it in a threaded version!

Anonymous said...

Keep the darn thing threadless. This is 2013 - we can all drop the annoying trope about needing a quill stem for constant adjustments. Do you still use non-aero levers so that we can adjust our levers on the fly? No - and bar height is basically a set-it and forget-it kinda thing.

Anonymous said...

How about black with red decals?

And at least available in a 62 or 63cm.

s said...

One decal for sure.

Modern and Traditional all at once.

Preston Grant said...

Blue for me. Decals no matter.

annette said...

Red, it's very classy!

Anonymous said...

Red, 60mm rake in all sizes. No point in high trail.

alex said...

Great frame, keep killing it VO.

Anonymous said...

Glad to see mid-trail, by the way. Not every bike needs to be low; I have both and prefer mid over low most of the time.

Dan

Ken said...

Please have a threaded fork with a quill stem. One inch. There are many bikes out there already with threadless stems such as Soma and Surly to name a few. Being older I want to have the option to raise the stem if needed. Red looks really good on this and I love the VO headbadge. Cannot wait to see the final product.

Anonymous said...

Blue with one decal,I already have an orange,red,white bike need a blue. :^)
Really like how this frame is designed. VERY tempting....

Riggs said...

Look up photos of the Schwinn Volare from 76-77. It was really a Paramount grade bike. The orange and chrome was stunning.

accyclist said...

I know this is a hotly debated topic but I am disappointed to see a threadless stem. Yes, this is 2013 and as one commenter pointed out there are plenty of steel threadless stem bikes out there. I think most of the folks who want the quill stem, myself included just want to be able to get the handle bars up higher without an ugly pile of spacers. I don't think too many people would argue that a 1" threaded stem is more elegant than any of the available threadless handlebar boosting options.
A dark red leaning towards maroon would be nice and more classic than a bright red.

Pierce said...

a threadless headset? ...sigh

Anonymous said...

Of those two color/decal choices, blue with one or two decals. A dark burgundy or ruby paint color would be the dream paint.

Is the steerer 1"? It looks thinner up front than most threadless bikes. You didn't ask, but I much prefer a threaded steerer (and quill stem) on bikes with a level top-tube.

When will the tubing spec be available?

Will the smallest size(s) be 650B?

Great looking frame! Thanks for doing what you do VO!

Marcin S. said...

Red please, two decals and thumbs up for threadless steerer

Anonymous said...

Red with One decal. I also appreciate the threadless headset.

Anonymous said...

Anon at 4:00pm hasn't been riding long enough if he thinks stem height is set it and forget it. As I approach my 8th decade, I find my "bars get higher and my gearing gets lower". I am thankful for the adjustability on my six bikes ranging from 20 to 47 years old.

Dave said...

I own 3 V-O bikes and they're my favorite rides, but if you're moving to threadless stems then I've bought my last V-O bike. Limitations in the adjustability of threadless stems have caused me problems (and cost me a lot of money to correct them), and I decided a couple of years ago to never buy another one. I never thought I'd have to cross a V-O bike off my list for that reason, but I guess I was wrong. Would you mind telling us what drove you to change your philosophy on this?

Bob Torres said...

Looks great I like the red with two decals. I hope the 51cm and 53cm frames are not made with its top and bottom tubes intercepting before meeting the head tube. This made the campeur look pretty ugly. If this frame looks and rides right, I might buy my second frame from VO.

Anonymous said...

63/65cm please!!

Ken said...

Love the colors! Either ones look great. The red sticks out because there are not that many red bikes. I love the VO headbadge on the bike. Please make it a quill stem. I am older and it just makes it so easy to adjust the handlebar height which is so important for proper fit. As other posters have said there are many threadless bikes out there already. I vote for threaded one inch with a quill stem!

enzomatic said...

This bike checks pretty much everything off my wish list. I'd like to +1 the pearlescent orange from the schwinn voler, voyagers also commonly came in that color and my 77 paramount is that color. I really think it's the prettiest paint color I've seen on a bike and would love to see it revived it really makes my nervex lugs pop without being too flashy at a distance. I'd prefer threaded out of habit but it's not a deal breaker if it significantly brings the price point down.

Anonymous said...

From a strictly aesthetic point of view, I think threadless looks better than threaded on bikes with modern parts. Just my .02

Really, as long as your fork is not cut too short a threadless set up has tons of adjustability by rearranging spacers and, of course, stems with different rises.

Note - all my current bikes are threaded, but threadless is cool, too. Go VO!

Noah said...

Red with two decals gets my vote. Like to echo the please don't make this bike with a threadless stem sentiments. Please don't ;)

philcycles said...

A muted sage green with a single decal on top of the downtube.
Phil Brown

Anonymous said...

Looks like people are pretty split on the threaded-threadless debate. Otherwise, a very nice looking bike!

Anonymous said...

Love the lugs and fork. Kinda leaning towards the red, but, agree that Orange would be sooo much better ;)
Traditional quill stem please!

Anonymous said...

Once you start doing the decorative reinforcing rings at the head tube, and the brazed-on seat collar, and the seatstay caps, what advantages are there to staying with TIG'ed joints? My preference, regardless of color or threadlessness, is for lugged construction. Why not?

fixedweasel said...

You hit a home run with the bi-plane fork crown. Beautiful, and you just don't see them much anymore. Happy to see it threadless albeit I can understand why folks would want a quill on a repro Constructeur. Not a fan of either color though. Color(s) should be a bit more classy/muted on a frameset like that. Good job.

John I said...

Since we are now voting on stems, count me with the threaded/quill set.

Anonymous said...

I prefer threadless. It just feels more solid and precise.

When you combine a long quill, a short steer tube, movement in a less secure headset (esp due to loosening effect of forces at the cable hanger)and a load up front (even a small one), the effects on steering are noticeable. That's my experience with my vintage and modern tourers. YMMV.

Didn't Herse avoid the traditional quill? Probably meant something.

Anonymous said...

I love the blue, but I've always been partial to orange bikes. Frankly, the frame is so nice that I'd probably be perfectly content with any color. I would, however, much prefer a threaded fork. Thank you.

Anonymous said...

Red.
Although I wouldn't mind an Orange should you give in to popular demand.
At first, I didn't even realize the frame combined TIG'd joints with the other brazed details... From the close-up photos of the headtube and fork I made the assumption it would be fully lugged. Not a deal breaker for me, though. I'm a fan of the overall design and pending available sizes and other specs I may be swayed. VO, I bet you didn't intend for this to turn into the threaded vs. threadless debate... but I've used both and appreciate all of their benefits. My latest fixer-upper uses your threadless quill adapter and I couldn't have done without the detachable faceplate of the threadless stem. I was able to swap out multiple handlebars with ease until I found the perfect fit while the quill allowed effortless height adjustment. Now I know where I want my bars and I could get myself a proper quill for that frame and use the adapter for the next re-build!

orc said...

It's a pretty frame; I'd be tempted to buy one except that all I'd want from it would be the fork :-) (And as for threadless vs. threaded, it seems like the easiest way to get a threaded fork is to find a lbs with the appropriate die and have them add an inch or so's worth of threads? It's a lot easier to thread a threadless fork than it is to threadless a threaded fork!)